QNESS HARDNESS MEASUREMENT DEVICE
All Rockwell, Vickers, Brinell and Knoop hardness measurements can be applied according to current standards. I has 0.5 to 250 kg load cell capacity and auto-focus optical measurement system. Maximum sample weight is 250 kg and maximum sample height is 300 mm. It has 2.5X and 10X lenses for measurement.
Following test can be applied by universal hardness measurement device
-
Brinell Load; 1 / 2,5 / 5 / 6,25 / 10 / 15,62 / 31,25 / 62,5 / 125 / 187,5 / 250 kg
-
Vickers Load; / 1 / 2 / 3 / 5 / 10 / 20 / 30 / 50 / 100kg
-
Rockwell Load; 15 / 30 / 45 / 60 / 100 / 150kg
-
Knoop Load; 1 / 2kg
-
Plastic test Load; 49,03 / 132,9 / 357,9 / 961 N
Following test standarts can be applied by universal hardness measurement device
-
DIN EN ISO 6508 & ASTM E-18 (for Rockwell)
-
DIN EN ISO 6506 & ASTM E-10 (for Brinell)
-
DIN EN ISO 6507 & ASTM E-92, ASTM E-384 (for Vickers)
-
DIN EN ISO 2039 (for Plastic specimens )
MICRO HARDNESS TEST DEVICE
Micro Hardness Test Device has fully automatic micro-hardness measurement. The load cells of this device has 1 g to 10 kg motorized capacity. Hardness scan is performed automatically with the motorized moving table in X, Y axis. There are auto focus and metering system.
Following test can be applied by Qness hardness measurement device related to standards.
-
Measurement can be done with 25X and 100X magnification.
-
Vickers measurement is done related to DIN EN ISO 6507, ASTM E-384 standards and 0.01, 0.025, 0.05, 0.1, 0.2, 0.3, 0.5, 1, 2, 3, 5 and 10 kg loads.
-
Knoop measurement is done related to DIN EN ISO 4545, ASTM E-384 standards and 0.01, 0.025, 0.05, 0.1, 0.2, 0.3, 0.5, 1 and 2 kg loads.
-
Hardness values can be converted to each other related to DIN EN ISO 18265, DIN EN ISO 50150 and ASTM E140 standards.
Click here to see the service fee.
|